Components
BA/PW Series Prefab Laterals
(3-pc Stainless Ball Valve Custom Manifolds)
INDUSTRIES
FOR DETAILED PRODUCT
INFORMATION AND SPECIFICATIONS
Pre-fab manifolds reduce the number of welds typically required by up to 65%. Cost, time pressure and lack of skilled labor combined with ever increasing demands on high quality gas and water systems call for new ways of cooperation. Drilling and collaring combined with proprietary welding technology reduces costs by over 30%. BA Series manifolds are cleaned and bagged in a cleanroom.
Working Pressure |
Vacuum to 1000 psig (69 bar) |
Temperature |
–20 to 325° F (–29 to 162°C) |
Flow Coefficient |
1.1 to 2100 |
Body Materials |
304/316 Stainless steel CF8M/CF8 |
Packing Materials |
TFM, PTFE |
Size/Type |
½” to 12” Tube/Pipe Main; ¼” to 4” Valve, Compression, Flange, NPT, Tube/Pipe Extensions |
Configurations |
SHC, DHC, DHT Manifolds, optional purge ports |
Related Products
Evans PLT Series Presslok® , is an innovative tube size press system for joining 304/316L tube for industrial air, inert gas, process cooling water, vacuum exhaust and other low pressure general service installations.
Evans Components, Inc. was the first to introduce a High Purity Valve for use in the Semiconductor marketplace.
Evans PW Series valves perform to the highest levels of leak integrity available on the market. All valves and valve assemblies are 100% helium leak tested to ensure reliability and low cost of ownership.
R4I (Ready for Installation) Pre-fab manifolds are designed to meet all UHP cleanliness specifications. R4i laterals are fabricated using a pulled-tee method then welded, tested and packaged in a class 10 cleanroom environment. This method of fabrication reduces the number of welds typically required by over 65%. Cost, time pressure and lack of skilled labor combined with ever increasing demands on high quality gas systems call for new ways of cooperation. Drilling and collaring combined with proprietary welding technology reduces overall costs by over 30%.
R4I (Ready for Installation) Pre-fab manifolds are designed to meet all UHP cleanliness specifications. R4i laterals are fabricated using a pulled-tee method then welded, tested and packaged in a class 10 cleanroom environment. This method of fabrication reduces the number of welds typically required by over 65%. Cost, time pressure and lack of skilled labor combined with ever increasing demands on high quality gas systems call for new ways of cooperation. Drilling and collaring combined with proprietary welding technology reduces overall costs by over 30%.
CATEGORIES
PRODUCTS