Back to all products

Components

Evans Dogbone
(Co-axial tube connectors)

INDUSTRIES

  • Clean Energy
  • Semiconductor

FOR DETAILED PRODUCT
INFORMATION AND SPECIFICATIONS

PRODUCT PDF

Evans Dogbones reduce installation costs for connection of outer tube for co-axial tube systems. The Dogbone simply slides into place over the outer tube and is tightened using conventional hand tools.

Working Pressure

225 psig (15 bar)

Temperature

-10F (-23C) to 400F (204C)

Flow Coefficient

NA

Body Materials

316SS

Materials

Stainless steel / Nylon or Teflon Ferrules

Size/Type

1/2” – 1” Compression

Configurations

Straight connector
Related Products
UHP Series Prefab Electropolish Laterals (UHP Valve Custom Manifolds)

R4I (Ready for Installation) Pre-fab manifolds are designed to meet all UHP cleanliness specifications. R4i laterals are fabricated using a pulled-tee method then welded, tested and packaged in a class 10 cleanroom environment. This method of fabrication reduces the number of welds typically required by over 65%. Cost, time pressure and lack of skilled labor combined with ever increasing demands on high quality gas systems call for new ways of cooperation. Drilling and collaring combined with proprietary welding technology reduces overall costs by over 30%.

R4I (Ready for Installation) Pre-fab manifolds are designed to meet all UHP cleanliness specifications. R4i laterals are fabricated using a pulled-tee method then welded, tested and packaged in a class 10 cleanroom environment. This method of fabrication reduces the number of welds typically required by over 65%. Cost, time pressure and lack of skilled labor combined with ever increasing demands on high quality gas systems call for new ways of cooperation. Drilling and collaring combined with proprietary welding technology reduces overall costs by over 30%.

80 Series Mini (1-pc 316SS Ball Valves)

80 Series mini 1-pc ball valves are constructed out of bar stock, unique injection molded TFM 1600 low dead space seat eliminates multiple seal points, requires higher torque to operate. Bagged in cleanroom.

80 Series mini 1-pc ball valves are constructed out of bar stock, unique injection molded TFM 1600 low dead space seat eliminates multiple seal points, requires higher torque to operate. Bagged in cleanroom.
90 Series Mini “Full Bore” (2-pc 316SS Ball Valves)

90 Series mini ball valves are constructed with a low-cost cast body design, all sizes incorporate a “full bore” body and low torque design, valves are bagged in cleanroom, locking handles are optional.

90 Series mini ball valves are constructed with a low-cost cast body design, all sizes incorporate a “full bore” body and low torque design, valves are bagged in cleanroom, locking handles are optional.
SS-G Series (316SS 2-pc Integrated Gas Stick)

CFOS grade (cleaned for O2 service) integrated stainless 2-pc gas stick incorporates a ball valve, regulator, pressure gauge and 74-micron pre-filter.

CFOS grade (cleaned for O2 service) integrated stainless 2-pc gas stick incorporates a ball valve, regulator, pressure gauge and 74-micron pre-filter.

CATEGORIES

  • PCW (Process Cooling Water)
  • CFOS (Cleaned for Oxygen Service)
  • UHP (Ultra High Purity)

PRODUCTS

Back to Top